- Heavy hammer Mobile Crusher 114 Time
- Roll Crusher 696 Time
- Composite crusher 434 Time
- Wheel Sand Washer 290 Time
- VSI Sand Maker 312 Time
- Sand recycling machine 175 Time
- Super Ultra-fine Mill 315 Time
- Powder Concentrator 263 Time
- Belt Conveyor 386 Time
- Sand Washer 180 Time
Slag Dryer
Introduction
Slag dryer is widely used in a variety of materials drying operations. As reliable operation, convenient operation, strong adaptability, large capacity, it is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
Slag dryer is suitable for drying granular materials in general. It can also be mixed with some materials by drying sticky paste materials or materials with higher water content. Commonly used in dry sand, slag, Sludge, coal, animal waste and so on.
Operation Principle
1.Material to be dried enters the drier, as the dryer rotates,the material is lifted up by a series of internal fins lining the inner wall of the dryer.
2.When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls.
3.The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated.
Technical Parameters
Model （mm） | Gradient （%） | Rotation Speed （r/min） | Feed-in air Temperature （℃） | Power （kw） | Capacity （t/h） | Weight （t） |
Ф600x6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
Ф800x8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
Ф800x10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
Ф1000x10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
Ф1200x10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
Ф1200x12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
Ф1500x12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
Ф1800x12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
Ф2200x12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
Ф2200x18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10-18 | 53.8 |
Ф2200x20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
Ф2400x20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
Ф3000x20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 78 |
Ф3000x25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-40 | 104.9 |
Features
1.Anti-overload ability, large handling capacity, less energy consumption, low investment.
2.Parallel stream method, high evaporation intension, high heat efficiency
3.Adjustable operation parameter according to property of materials, full heat exchange
4.New feeding and discharging device to avoid blocking, uncontinuous, uneven and revert phenomenon, low load of dust catching system.
5.New internal structure, strengthened cleaning and heat-transmission effection for the dried materials, no phenomenon of attachment on the inner wall of the cylinder, wide flexibility for moisture and stickiness.
