- Heavy hammer Mobile Crusher 66 Time
- Roll Crusher 547 Time
- Composite crusher 338 Time
- Wheel Sand Washer 227 Time
- VSI Sand Maker 209 Time
- Sand recycling machine 126 Time
- Super Ultra-fine Mill 245 Time
- Powder Concentrator 214 Time
- Belt Conveyor 331 Time
- Sand Washer 124 Time
Ball Mill
Introduction
Ball mill is the key equipment for grinding after the crush process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics. It also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.
Operation Principle
The ball mill is a horizontal rotating device transmitted by the outer gear, two-chamber, and grid discharging type. The materials are transferred to the first grinding chamber through the quill shaft uniformly, there are ladder liner and ripple liner and different specifications of steel balls in the chamber, the centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. After the coarse grinding of material in the first chamber, material enter into the second chamber through separating plate, there are liner plate monted, steel ball, make the Further grinding .the ground material is discharged through the discharging board thus the grinding process completes.
Technical Parameter
Model | Rotation Speed Of The Chamber (r/min) | Ball Load (t) | Feed-In Material Size(mm) | Feed-Out Material Size(mm) | Capacity (t/h) | Power (kw) | Weight (t) |
Ф900×1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 4.6 |
Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 15.6 |
Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 90 | 21 |
Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 24.7 |
Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 28 |
Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 32 |
Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 34 |
Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 36 |
Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 210 | 34 |
Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 42 |
Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 50 |
Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 48.5 |
Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 370 | 52.8 |
Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 54 |
Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 56 |
Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 65 |
Ф2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 400 | 94 |
Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 430 | 102 |
Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | depends the technological conditions | 800 | 137 |
Features
1.Large application range,simple structure and convenient maintenance.
2.Large capacity and continuous work are very obvious.
3.Barrel lining and grinding media can apply various abrasive materials.
4.Installation and adjustment are very convenient and easy to be operated.