- Heavy hammer Mobile Crusher 114 Time
- Roll Crusher 696 Time
- Composite crusher 434 Time
- Wheel Sand Washer 290 Time
- VSI Sand Maker 312 Time
- Sand recycling machine 175 Time
- Super Ultra-fine Mill 315 Time
- Powder Concentrator 263 Time
- Belt Conveyor 386 Time
- Sand Washer 180 Time
Flotation Machine
Introduction
Flotation machine is widely used for roughing, concentrating and reverse flotation of nonferrous metals that include copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic minerals.
Operation Principle
Flotation machine is applicable for the separation of nonferrous metal and ferrous metal. It is also used for separating nonmetal, such as fluorite and talcum.Through V belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; On the other hand it stirs ore slurry and mix with medication to form the mineralized froth. By adjusting the height of flashboard to control the liquid level and make the useful froth scraped by loam board.
Technical Parameters
Model | Effective Volume m3/tank | Impeller Diameter （mm） | capacity（m3/min） | Impeller Rotation Speed （r/min） | Scraper Rotation Speed （r/min） | Motor | Dimensions （mm） | weight t/tank | |
model | Power（kw） | ||||||||
XJK—0.13 | 0.13 | 200 | 0.05-0.16 | 600 | 17.5 | Y90L-4 | 1.5 | 2100\865\900 | 0.35 |
XJK—0.23 | 0.23 | 250 | 0.12-0.28 | 500 | 17.5 | Y90L-4 | 1.5 | 2625\1130\1290 | 0.41 |
XJK—0.35 | 0.35 | 300 | 0.15-0.5 | 470 | 17.5 | Y100L1-4 | 2.2 | 3012\1350\1320 | 0.45 |
XJK—0.62 | 0.62 | 350 | 0.3-0.9 | 400 | 16 | Y100L2-4 | 3 | 3800\1500\1550 | 0.85 |
XJK—1.1 | 1.1 | 500 | 0.6-1. 6 | 330 | 26 | Y132M-6 | 5.5 | 4680\1820\1950 | 1.4 |
XJK—2.8 | 2.8 | 600 | 1.5-3.5 | 280 | 26 | Y160L-6 | 11 | 7750\2600\2700 | 2.43 |
Features
1. Large air-absorption capacity
2. Low energy consumption
3. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.
4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.
5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.
6. The impeller has backward inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.
